What Makes Up An Efficient COOLing Fan?
It is no secret that accessories of the engine rob some horsepower. This is apparent when the driver turns the air conditioning and the car slows slightly. To recover some of the lost horsepower siphoned off, auto experts recommend the installation of an efficient cooling fan.
Performance parts cooling systems technologies auto are crucial to the overall arrive and drive feel of a vehicle. An electric cooling fan, for instance, is driven by a belt attached to the engine. It is powered by one or more separate electric motors hence it does not drain off auto horsepower. In addition, the car is capable of recapturing as much as 17 horsepower and 20 lb.-ft. of torque.
An electric auto fan operates off a temperature sensor. It kicks on when required and runs faster when auto temperature increases. Driving speed will not affect its performance because it is not mechanically attached to your engine. When the car is idling or stopped, electric auto fan still draws much more air than factory auto fan.
Due to the variety of operating temperatures of engines, an electric cooling fan is equipped with a built-in thermostat that can easily be adjusted. The accessory can also be adjusted to complete cooling system car coolant fans and parts. This can be done by splicing a wire that connects to the compressor.
Selecting an efficient cooling fan, could be as simple as choosing a model for a certain vehicle. However, if a car has no specific fan, custom installation could be resorted to. Custom installation necessitates adjustable mounting brackets to be efficient. Also, dimensions of the mounting surface, depth necessary, and auto cooling fanís accessories must also be considered. Also be aware of possible hindrances like overflow tanks, air conditioning, power steering lines, wiring, transmission oil dipstick and more.
The main purpose of automotive cooling system parts is to remove excess heat from the engine and to keep its most efficient temperature. In a car equipped with an internal combustion engine, a cooling system is a must. If it is not provided, auto parts near the engine would melt because of the burning of fuel nearby. The cooling system of a water-cooled engine consists of a water jacket, radiator and radiator cap, thermostat, water pump, a cooling fan (electric or belt-driven), hoses, the heater core, and overflow tank (in most cases).
Fuel-burning engines generate enormous amounts of heat. As a fact, temperature could increase up to 4,000 degrees F when the air-fuel mixture burns. Nonetheless, the standard operating temperature is about 2,000 degrees F. About one-third of heat produced in the combustion engine could be removed by the auto cooling parts.
About the Author: Joe Thompson is the owner of a successful auto body shop in Ferndale, California. This 38 year old is also a prolific writer, contributing automotive related articles to various publications.