You can play the Guitar Drum Revolution game (flash game) by following the link below: Play Guitar Drum Revolution Game

You can play free online games (flash games) by following the link below: Free Online Games Play the samples below: Fun Burger African Mask Mask Pinball Fortress Games Arctic Quest Fun Burger African Mask Mask Pinball Fortress Games Arctic Quest

You can view the people (celebrities) news and the front page news (with videos, images and constant updates) by following the link below: View Recent News or by visiting the WhmSoft Service blog: News Photos Slideshows

Any homeowner with an attic knows there are certain challenges to maintaining the space under the roof. Attics are notorious for being the perfect place for mold, mildew, roof rot and other structural problems to occur. In addition to making sure the area is properly ventilated, there is also the need to make sure air circulates around and out of the space. This is where an attic vent fan comes into play.

Attic fans are relatively easy to install. If the existing wiring is up to code to support the power the fan will pull, the hardest part of the job is over. The attic vent fan should be situated as an insert or at least near a vented area. The idea is to create airflow from the outside that will be pulled in and distributed throughout the space by the blade action of the attic vent fan. In order to allow for easy airflow out of the attic space, it is important to make sure you have sufficient venting. Just as your attic fan needs an open vent to pull fresh cooler air into the attic, there has to be a way for the hot air to escape from the space. Make sure that more or less opposite of your attic vent fan you have some type of vent to allow that escape, whether it be unobstructed ridge vents or even soffit vents (located under the eaves) that are not blocked with insulation.

An alternative is to install an attic vent fan that is manufactured for roof mounting. This works especially well if you have a shingled roof and have plastic roof ridge vents. With this type of fan, you would mount it as close to the peak of your roof as possible and as close to opposite the vents that will act as the avenues for the hot air to escape the space.

Attic fans can help keep down the temperature in your attic, as well as help prevent the mold and mildew that often accompany areas with little to no air flow. For suggestions of which type and size attic vent fan is right for your home, check out your options at your local home store.

About the Author: Scott Byers is the owner of Vent Info, a complete attic vent resource with articles on attic vents that you need to read.